Introduction
Strainers are used in front of compressors, pumps, control valves and devices. In all situations the apparatus is protected from dirt present in the installation. In start-up situation rougher mesh is used (500 micron) and for permanent filtration and/or in gas lines a finer mesh can be applied (60, 144 or 250 micron).
 
Filters F 25-50 (1"- 2")
For filtering smaller gas and liquid flows the F 25-50 series is a small, light and competive solution.
1. Nominal Bores 25,32,40 and 50mm (1"-2")
2. Angle and straight executions
3. Filter meshes 144 and 263 microns

  
Filters F 100-150 (4"- 6")
For filtering larger gas and liquid flows the F 100-150 series is applicable.
1. Nominal Bores 100,125 and 150mm (4", 5" and 6")
2. Angle and straight executions
3. Filter meshes 60, 144, 250 and 500 microns
4. Optional drain valve mounted

Working media
Applicable for all common refrigerants such as NH3 (R717), R22, R134A, R404A, R502, R507, R404A, R407C, R410A, CO2 (R744) and non-corrosive gases/liquids.

Testing and Certification
Every single filter is tested in our factory according to EN12284 and in general every filter is designed according to CE PED 97/23/EC.